ACCESSORIES

• 1-7/8" Domed Cap
• 2-3/8" Domed Cap
• 2-7/8" Domed Cap
• 3-1/2" Domed Cap
• 4-1/2" Domed Cap

• 1-7/8" Low Profile Cap
• 2-3/8'' Low Profile Cap
• 2-7/8" Low Profile Cap
• 3-1/2" Low Profile Cap
• 4-1/2" Low Profile Cap

• 1-7/8" Round Pressed Cap
• 2-3/8" Round Pressed Cap
• 2-7/8" Round Pressed Cap

• 1-5/8" Plastic Plug
• 2-3/8" Plastic Plug

• 1-1/2" Square Pressed Cap
• 2" Square Pressed Cap
• 3" Square Pressed Cap
• 4" Square Pressed Cap

• 2" Square Low Profile Cap
• 3" Square Low Profile Cap
• 4" Square Low Profile Cap

• 2" Square Plastic Plug

• Cable Clips 1/4"
• Cable Clips 5/16"

• Continuous Fence Clips 1-1/4"
• Continuous Fence Clips 1-5/8"
• Continuous Fence Clips 2-3/8"

• Purlin Angle Clips

• 3" Barrel Hinge
• 5" Barrel Hinge
• 6" Barrel Hinge
• 7" Barrel Hinge

• 3-1/2" Winged Hinge
• 7" Winged Hinge

• 3" x 3" x 1/8" Flat Hinge
• 4" x 4" x 3/16" Flat Hinge
• 6" x 6" x 5/16" Flat Hinge

• 1/2" Female Bat Wing Hinge
• 5/8" Female Bat Wing Hinge
• 5/8" Male Bat Wing Hinge

• 1-7/8’’ Oil Pipe Hinge Sleeve Set
• 2-3/8" Oil Pipe Hinge Sleeve Set

• Gate Hinge - 1000 lbs.
• Gate Hinge - 3000 lbs.

• 4" Lockable Gate Latch
• 5" Lockable Gate Latch
• 6.5" HD Lockable Gate Latch
• 8" Lockable Gate Latch

• 1/2" Slide Bolt Lockable Latch
• 2" Gravity Gate Latch

• 12" x 5/8" Bar Gate Latch
• 17" x 6" Bar Gate Latch L/R

• 11" Spring Latch w/ Horse Shoe
• 14" Spring Latch w/ Horseshoe

• Chain Keeper w/ 2' Chain - Zinc

14 x 7/8" Lap Screws in the following colors: 

• Galvanized
• Light Stone
• Saddle Tan
• Charcoal Gray

12 x 1" Tek Screws in the following colors:

• Galvanized
• Light Stone
• Saddle Tan
• Charcoal Gray
• Ash Gray
• Slate
• Rustic Red
• Polar White
• Koko Brown
• Forest Green

10 x 1-1/2" - Metal/Wood Screws (Galv.)

• 2-3/8" Saddle Cap
• 2-7/8" Saddle Cap

• 2-3/8" Pipe Pal

• 1-7/8" Pipe Guide
• 2-3/8" Pipe Guide
• 2-7/8" Pipe Guide

• Weld Tab: 1/8" x 1-1/2" x 1" - 3/8" Hole
• Double-Hole Weld Tab: 1-1/2" x 3-7/8" - 3/8" Holes
• Radius Surface Mount Tab: 1.31" x 2.04" x 3/16" w/ 1.19 Radius - .053" Hole

• J Bolt (Zinc): 1/2" x 4.5"
• J Bolt (Bare): 5/8" x 6"

• 3" Cast Iron V Groove Wheel w/ Box
• 4" Cast Iron V Groove Wheel w/ Box
• 4" Premium V Groove Wheel w/ Box

• 3" Rubber Guide Roller
• 6" Rubber Guide Roller

• 8" x 1-3/4" Rubber Gate Wheel

• 4" square x 3/16 thick x 3/8 holes
• 5" square x 1/4 thick x 7/16 holes
• 6" square x 1/4 thick x 9/16 holes
• 8" square x 1/4 thick x 9/16 holes
• 10" square x 5/16 thick x 1/2 holes

• Post Clip 2-3/8" x 11ga
• Post Clip 3" x 11ga
• Post Clip Drill Chuck

• Galv. Tie Wire: 12.5ga x 406' Roll

• Single 3.625" x 4.25" x 1.5" w/ Guard
• Double 6.88" x 4.25" x 1.5" w/ Guard

• Single 4.25" x 4.5" x 1" w/ Guard
• Double 7.5" x 4.5" x 1" w/ Guard